MagTek MT-215 TTL SINGLE HEAD, 3-TRACK - Manual (Page 11)

5
SECTION 2. INSTALLATION
This section describes cabling information, mounting dimensions and timing.
PIN LIST AND CONNECTORS
Table 2-1 lists the connector pins and the required mating Connector.
Table 2-1. J3 Pin List
Pin Number TK 1, 2, 3
1 Back Sensor
2 Data TK 2
3 Card Present
4 Strobe TK 2
5 Key
6 +5V
7 GND
8 Strobe TK 1
9 Data TK 1
10 Strobe TK 3
11 Data TK3
Mating Connector*: Molex 22-01-2111
*Molex Terminals 08-50-0114
*Molex Key 15-04-9209
MOUNTING
Figure 2-1 shows the dimensions for mounting when using a flat-faced bezel. The top view
shows J1 and J3 connectors and pin 1 for both.
Note
For users who are interested in designing their own bezel, please
refer to the dimensions provided in Appendix A.