MagTek 3V & 5V - Manual (Page 6)

IntelliHead
2
• AGC (Automatic Gain Control) – reads cards from 30% - 200% of ISO 7811 amplitude standard
• Simplified firmware – Shift-Out format makes it easier to write controller code
• Wide operational temperature range – -40° C to +85°
C
• Wide range of card swipe speeds – from 3 ips to 100 ips (7 cm/s to 250 cm/s)
* See CONFIGURATIONS section below for the definition of 5V unit.
CONFIGURATIONS
The Transition Revision column in the table below represents the first revision for which the 3V
Delta ASIC (21006540/41) was used instead of the older 5V Delta ASIC. The 5V Delta ASIC
(21006529/39 or 21006536/37) is detailed in 99875336 or 99875259.
Part
Number
Transition
Revision*
Description
21030001 G IntelliHead 3V, 3 Track, butterfly spring, 125mm wire, 5-pin Molex connector
21030002 F IntelliHead 3V, 2 Track, butterfly spring, 125mm wire, 5-pin Molex connector
21030012 B IntelliHead 3V, 3 Track, 43mm spring, 125mm wire, 5-pin Molex connector
21030013 C IntelliHead 3V, 3 Track, Accordion spring, 125mm wire, 5-pin Molex connector
21030018 2 IntelliHead 3V, 3 Track, 4.05mm beam head, 125mm wire, 5-pin Molex connector
21030021 n/a** IntelliHead 5V, 3 Track, butterfly spring, 125mm wire, 5-pin Molex connector
21030022 n/a** IntelliHead 5V, 2 Track, butterfly spring, 125mm wire, 5-pin Molex connector
21030030 A IntelliHead 3V, 3 Track, 5.08mm beam head, 125mm wire, 5-pin Molex connector
** Not Applicable. This version will always use the 5V Delta ASIC and can be used if the application cannot
use the 3V model.
REFERENCE DOCUMENTS
Magnetic Card Reader Design Kit Technical Specification, P/N 99821002
Triple Track ASIC With Shift-Out, 3V, Specifications, P/N 99875337
Triple Track ASIC With Shift-Out, 5V RoHS Compliant, Specifications, P/N 99875336
Triple Track ASIC With Shift-Out, 5V, Specifications, P/N 99875259
Low Power Shift-Out IntelliHead User Manual, P/N 99875349
5V-to-3V Shift-Out IntelliHead User Manual, P/N 99875350