Waterloo F1521A1-3 - Manual (Page 6)

6
NOTE
If the Backwall with Metal Pegboard is purchased with this
Workbench, see Backwall instructions for assembly before
continuing to assemble the Workbench. Do NOT assemble top
before returning to these instructions.
• Attach (6) Gu to unit using (12) BB.
Gu(6)
BB
F
r
o
n
t F
r
o
n
t
Left Side Right Side
BB(12)
STEP 4 - Continued:
NOTE: Drawers may be organized in several configurations,
below is the slide positioning for the recommended drawer
configuration.
Carefully align slides and
push drawer in until
drawer stops.
STEP 5:
• Insert the drawer slides (Gd) into the workbench slides (Gu)
and push all of the way to the back.
• Pull the drawer open until it stops to ensure proper assembly.
• Repeat for the rest of the drawers.
• Square the unit and adjust for optimum drawer performance.
• Wrench tighten all fasteners.
• Remove drawers. (See drawer removal instructions.)
J
• Position J as desired.
• Mark centers of (6) square mounting holes.
Square
Mounting
Hole
STEP 6: