Waterloo F1971 - Manual (Page 6)

6
Screw
Door
Right
Process:
• Attach Grommets into holes provided in back panels of
cabinet.
Items Needed:
Grommet (Qty: 2)
Grommet
Grommet
Process:
• Place the Magnet on the right door in the locations noted.
• Make sure the adhesive backing is facing towards the
cabinet.
• Close the door to double check the Magnets are in the
correct positions.
• Open the door and remove the protective covering over
the adhesive on the back of the magnet.
• Close the door and press firmly on the front of the door to
seat magnets.
• The magnets will now be attached to the cabinet shell in
the correct location.
Items Needed:
Magnet (Qty: 2)
0.75-in.
(1.91 cm)
0.25-in.
(0.64 cm)
0.75-in.
(1.91 cm)
0.25-in.
(0.64 cm)
Process:
Note: Insure door is in unlocked position.
• Attach right door as shown using (8) #8 - 32 x 3/8" Pan
Head Screws.
• Adjust door for optimum performance before tightening
screws.
• Attach left side door in the same manner.
Items Needed:
#8 - 32 x 3/8" Pan Head Screw (Qty: 16)
Door Right
Door Left