Waterloo F1971 - Manual (Page 7)

OPERATION
Screw
7
Nut
Mounting
Bracket
Screw
Shelf Adjustment
• Empty shelf.
• Remove fasteners.
• Rotate shelf upward and pull forward, as shown.
• Move shelf to desired location.
• Insert back of shelf in notches, rotate shelf into place
and reinstall fasteners.
Leveling Foot Adjustment
• Adjust Screw Leveler to desired position with Flathead
Screwdriver or 7/16″ open end wrench as shown.
• Align cabinet with a stud. Adjust Leveler feet if needed.
• Drill 1/8″ pilot hole.
• Attach cabinet to stud using (1) #14 x 3 Hex Head Screw.
Process:
Note: Mounting bracket may be mounted on either side
of the cabinet. Mounting shown on left side.
• Place Mounting Bracket in desired mounting location.
Mark center of mounting hole location, using slots in
bracket as a template.
• Remove bracket. Drill 1/4" mounting hole.
• Mount to unit using (1) 1/4-20 x 3/4″ Button Head
Screws, and (1) 1/4-20 Serrated Flange Nuts.
• Finger tighten.
Items Needed:
1/4-20 x 3/4" Button Head Screw (Qty: 1)
1/4-20 Serrated Flange Nut (Qty: 1)
Mounting Bracket (Qty: 1)
#14 x 3 Hex Head Screw (Qty: 1)
Figure 8
Figure 8.1