Horner APG XL6 OCS - Manual (Page 35)

MAN0883-05-EN CH.7
March 4, 2010 Page 35 of 135 #1037
The Use CAN ID for last Octet checkbox does not affect Net Mask, Gateway, Status or Version
configuration.
Ethernet Module Protocol Configuration
The Protocol Support area contains a list of all the protocols supported by the platform being
configured. To activate a protocol, check its checkbox.
For protocols that require additional configuration, click on a listed protocol to select it and then click
the Configure Selected Protocol button. This will open a new dialog with configuration options for the
selected protocol.
For detailed information on individual protocol configuration refer latest version of ETN 300 Manual
SUP0740