Horner APG XL6 OCS User Manual
Page 92
CH.15 MAN0883-05-EN
March 4, 2010
Page 92 of 135
#1037
15.3
Establishing Communications
The preferred method of communicating between Cscape and an XL6 OCS is via USB port. The XL6
OCS can communicate with Cscape using USB to USB, USB to serial adapters, serial port
communications via MJ1 Port, Ethernet (with an Ethernet adapter board), onboard Ethernet Port (XL6e
only), CAN (CsCAN) or modems. For communications other than USB or the MJ1 port please refer to the
manual which ships with the communications adapter hardware being used for programming.
To communicate with the XL6/XL6e via USB you will need the automated driver installer located on the
Horner APG web site:
Click this button:
This will take you to the registration page.