AT&T 8503T - Manual (Page 21)

Abbreviated Dialing [ _ ]
Note: The 8503T voice terminal allows 12 programmed memory-dialing locations
accessed with the dial pad buttons. At these dial pad locations, you can store
telephone numbers or access codes. In addition, the DEFINITY Communications
System allows you to store numbers in a maximum of 3 Abbreviated Dialing lists.
To program or reprogram
an outside number,
extension, or feature code
into a personal list 1
2
3
4
5
6
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want to
program as items on your personal list(s) (see example
to the left)
Note: Each telephone number or feature code is
stored as a separate list item.
Pick up handset [dial tone]
Dial Abbreviated Dialing Program code
[dial tone]
Dial personal list number (1, 2, or 3)
Dial list item (1, 2, 3...) [dial tone]
Dial number you want to program (up to 24 digits)
Note: If you are programming an outside number, be
sure to include a trunk code, if applicable.
7
8
Press [ # ] [confirmation tone]
●
●
Number is stored
Repeat Steps 5 through 7 if you want to program
additional items on the same list; hang up and
begin again at Step 1 if you want to program
items on another personal list
Hang up to end programming
Note: Keep your own personal lists in the
Abbreviated Dialing table provided in the back of
this booklet; group, system, and enhanced lists are
available from your System Manager.
18