AT&T 8503T - Manual (Page 24)

To retrieve parked call 1 Dial Answer Back code
from any extension [dial tone]
2
Dial extension where call is parked
[confirmation tone]
Note: If you receive intercept tone, parked call has
been disconnected or retrieved by someone else.
Call Pickup [ _ ]
To answer a call to a 1 Press [ Call Pickup ]
member of your pickup or Dial Call Pickup code
group when your voice
● You are connected to ringing call
terminal is idle
To pick up a call 1 Press [ Hold ]
while you are active
● Present call is put on hold
on another call
● Green light flutters
2 Press [ Call Pickup ]
● You are connected to incoming call
Note: To return to held call after completing pickup
call, press fluttering [ xxxxx ].
21