DMC TSC-30/IC - Manual (Page 23)

Document No. DER-S0098A 22 Version 1.3 ©2012 DMC Co., Ltd.
TSC-30/IC Product Specification
11.Changes and improvements
11-1. Version history
§ TSC-30/IC
Ver0.1 (July 31, 2007)
Draft release
Ver0.2 (September 27, 2007)
2. Pin layout Pin layout was changed. (SW0, SW1, LED0, LED2, RxD_I)
3. Pin functions Pin functions were changed. (LED0, LED2, USB_PW, EEP-DI/JP11,
EEP-CLK/JP10, JP3, JP8)
4-2. Communication mode setting Terminal number was changed from 57 to 37.
4-5. Panel ID setting (USB mode) Replaced setting of JP4 with JP5.
“6. Packing Specification” was added.
“7. Storage Specification” was added.
“8. Implementation Temperature Specification” was added.
“9. Cleaning” was added.
Ver0.3 (November 29, 2007)
1-2. Outline 8-wire touch screen was added.
3. Pin function Pin functions were changed. (USBVref, USB_PW, JP6, JP7)
4-3. Touch screen mode setting 8-wire touch screen mode was added.
6-6. Product name label specification “Pb Free” was added.
Circuit Diagram In USB mode, Vcc is 3.3V, it changed the circuit of the USB_PW terminal.
Circuit Diagram A capacitor was added to a power I/F circuit.
Ver 1.0 (March 13, 2008)
First release
(Change from ver0.3.)
1-4. General specification Input response time was added.
2. Pin layout and representation Marking specification was changed.
3. Pin functions “8-wire” was added.
3. Pin functions “Sleep mode” was changed to “Power save mode”.
4-2. Communication mode setting “Vcc” was changed to “USB Vbus”.
5-2. Vibration frequency “In USB mode, Tolerance:±0.25%” was added.
9. Terminal Pin Specification was added.
Circuit Diagram In USB mode, Self-powered mode was added.
Circuit Diagram In USB mode, the part number of the resonator was changed.
Circuit Diagram Revision 1 for first release.
Document number was added.
Ver 1.1 (July 9, 2009)
5-2. 5-3. 5-4. “Rating” was changed to “Limits”.
5-3. Timing requirement “External clock timing” “Fixed to 6MHz” was added.
Dimensional Drawing The size of the width of the terminal “bp” was added.