Install the lamp, Save these instructions – LBL Lighting Tindra P User Manual
Page 4
4
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!
3A
Install the Lamp
SHADE
2
SOCKET
2
LAMP
3
Raise the shade to expose the socket.
Screw the lamp base completely into the socket.
Gently lower the shade until it rests properly on the
stopper.
To re-lamp, reverse this section.
1
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
STOPPER
4
Use
Type T9 Classic Edison
MAX 75
Watt
E26 base incandescent lamp.
Use
Type BT15 Medium
MAX 75
Watt
Base Lamp.