LBL Lighting Alaya SP - Manual (Page 4)

4
Connect the fixture bare wire and the canopy ground wire to
the ground in accordance with local electrical codes.
Connect the fixture wire with the white strip to the neutral
power line wire with a wire nut.
Connect the last fixture wire to the hot power line wire with a
wire nut.
Place all wires and wire nut connections properly inside the
electrical box.
Align the canopy holes with the crossbar threaded rods and
push it completely up.
Replace and tighten the lock washer and thumb screws to the
threaded rods to secure the fixture in place.
LOCK WASHER
THUMB SCREW
THREADED ROD
Install the Lamp
Use Volt, Watt Type A19 MAX 100 120
Medium Base Lamp.
CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Screw the lamp completely into the socket.
LAMP
SOCKET
Install the Fixture
3A
1
4A
2
3
4
1
5
6
3B
3
2
1
1
5
6