LBL Lighting Perf SP - Manual (Page 3)

3
NOTE: It is recommended that one person hold the
chandelier while the electrician finishes the installation.
Place all wires and wire nut connections properly inside the
electrical box.
Slide the canopy onto the crossbar and secure it in place by
tightening the two thumb screws.
THUMB
SCREW
In accordance with local electrical codes, make sure that the
crossbar is grounded.
Connect the fixture black wire to the hot power line wire with
a wire nut.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
1G
11
1H
14
12
13
15
13 12
15
15