Adjust the suspension cables (optional), Save these instructions – LBL Lighting Vera S User Manual
Page 4
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
Remove the three mounting rods.
Align the shade with the fixture assembly and reinstall
the three mounting rods by screwing them in
completely.
4B
SHADE
MOUNTING
ROD
3
2
4C
DIFFUSER
Unscrew the finial and remove one of the plastic gaskets
while holding the other plastic and metal gasket in
place.
Install the diffuser and then the plastic gasket and
secure them in place by reinstalling the diffuser.
5
4
PLASTIC GASKET
FINIAL
1
Adjust the Suspension Cables
(Optional)
If necessary, adjust the aircraft cables until the fixture is
level; feed the cable into the cable clutch to raise the
fixture and push in on the cable clutch nipple to release
the cable and lower the fixture.
CABLE
CLUTCH
CABLE
CLUTCH
1
5A
PLASTIC
GASKET
METAL
GASKET