Save these instructions, 4c 4b – LBL Lighting Vitre Rectangle S User Manual
Page 4
4
B
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
Adjust the aircraft cables until the fixture is level; feed
the cable into the cable clutch to raise the fixture and
push in on the cable clutch nipple to release the cable
and lower the fixture.
CABLE
CLUTCH
Place the driver, all wires, and wire nut connections
inside the canopy.
Align the canopy holes with the mounting plate holes.
Secure the canopy in place by tightening the four
mounting plate screws.
4C
4B
6
4
5
MOUNTING
PLATE SCREW
MOUNTING
PLATE SCREW
CABLE
CLUTCH
6