LBL Lighting Mademoiselle S - Manual (Page 4)

4
Screw the cable post completely to the threaded nipple.
CABLE POST
THREADED NIPPLE
3E
5
5
6 Feed the cable through the cable post.
To level the fixture, push the tab on the cable clutch and feed
more or less of the support cable into the cable clutch. Make
fine adjustments to each cable until the fixture is level.
Trim the excess cable from the cable post.
CAUTION: Make sure to support the fixture while
making adjustments, an assistant will be needed to
complete this step.
3F
7
CABLE
CLUTCH
8
CABLE CLUTCH
7
CABLE POST
8
7
4A
Locate then separate the 4 different mesh shapes in the
following quantities:
Large: 2 pcs.
Medium: 6 pcs.
Small: 15 pcs.
Thin Strip: 4 pcs.
1
Install the Crystals
L
M
S
THIN STRIP
2 pcs.
6 pcs.
15 pcs.
4 pcs.
Note: The following steps to install the mesh is
simply a placement diagram. The installer should
ensure that the rectangular mesh is an equal length
on each side and slightly rotated when draping over
the fixture to create an angular look. Taking the time
to notice the aesthetics of the placement of each
piece will produce the best results. Using photos
from the catalog or product web page at
www.lbllighting.com will also help as a reference.