Adjust the suspension cables, Save these instructions – LBL Lighting Duke Grande User Manual

Page 4

Advertising
background image

4

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2013 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

A Generation Brands Company

1

Adjust the aircraft cables until the fixture is level; feed
the cable into the cable clutch to raise the fixture and
push in on the cable clutch nipple to release the cable
and lower the fixture.

CABLE
CLUTCH

CABLE
CLUTCH

1

5A

Place all wires, wire nut connections, driver, and the
secondary strain relief properly inside the canopy.

Install the canopy onto to crossbar as secure it tightly
with the two thumb nuts.

NOTE:

It is recommended that one person hold the

fixture while the electrician finishes the installation.

12

13

Adjust the Suspension Cables

4D

THUMB NUT

THUMB NUT

Advertising
This manual is related to the following products: