LBL Lighting Veneto Grande SPCF - Manual (Page 4)

4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2008 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
3C
Place all wire and wire nut connections inside the electrical
box.
Align the canopy holes with the crossbar holes. Secure the
canopy in place by tightening the two M5 button head screws
with the provided 2.5MM Allen wrench.
Tighten the three aircraft cable bushings to the glass shade cap
screws (refer to step 6 and figure 2C on page 3).
5
6
2.5MM ALLEN
WRENCH
M5 BUTTON
HEAD SCREW
5
6
6
7