LBL Lighting Veneto Venti SPCF - Manual (Page 3)

3
Place all wire and wire nut connections inside the
electrical box.
Align the canopy holes with the crossbar holes. Secure
the canopy in place by tightening the four screws with
the provided Allen wrench.
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the black fixture wire to the hot power line wire
with a wire nut.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Install the Fixture
Use Watt Type Quad Tube MAX 26
G24Q-3 Base Compact Fluorescent Lamp
With Each Socket.
C AUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Install the lamp by pushing the lamp base completely into the
socket. Repeat for each socket.
LAMP
SOCKET
Install the Lamp
4A
2
3
1
3
2
1
SCREW ALLEN
WRENCH
4B
4
5
5A
1
1