LBL Lighting Batons Chandelier SCH - Manual (Page 2)

2
Align the canopy housing holes to the crossbar threaded holes
and completely tighten the two provided #8-32 screws to
secure the canopy housing in place.
#8-32
SCREW
CAP NUT
THREADED ROD
In accordance with local electrical codes, make sure that the
canopy housing is grounded.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
Place all wires and wire nut connections properly inside the
canopy housing.
Slide the dome cover onto the threaded rods and secure it in
place by tightening the cap nuts completely to the threaded
rods.
1F
7
1E
5
6
8
1G
10
9
7
5 10
5
8
6
10
9