LBL Lighting Batons Chandelier SCH - Manual (Page 3)

3
Starting with the socket assembly wires marked 1 and 2, insert
the assembly wire marked 1 into the dome cover power post
that is marked 1.Tighten the M3 set screw with the provided
1.5 MM Allen wrench to secure the wire in place.
While supporting the socket assembly, insert the wire marked
2 into the dome cover power post marked 2.Tighten the M3
set screw with the 1.5 MM Allen wrench to secure the socket
assembly in place.
Repeat steps 1 and 2 to attach other socket assemblies in
ascending order as marked on the wires.
1
7
6
10
3
11
2
8
5
9
4
12
Install the Fixture Arms
DOME COVER
POWER
POST
1.5 MM ALLEN
WRENCH
SOCKET ASSEMBLE
WIRE
DOME COVER
Install the Lamp & Glass Shade
SOCKET
LAMP
Use Watt Bi-Pin Xenon (Xelogen) MAX 10
Lamp With Each Socket.
For each socket, push the lamp pins completely into the socket
holes.
NOTE: Use only your fingers and a soft cloth to install
the lamp.
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular
Halogen lamp.A regular Halogen lamp requires a protective
glass shield.
GLASS SHADE
SOCKET
SPRING CLIP
Push the glass shade completely onto the spring clip.
1
M3 SET
SCREW
2A
1
2
3
3A
1
3B
2
1
2
2
1