Install the canopy, 1d 2a – LBL Lighting Fusion Jack Wood Canopy 11 Light Round LED User Manual
Page 2
Advertising
2
Line up an anchor with the center of a backplate hole and
push the anchor in up to the threads.
Screw the anchor the rest of the way in with a screwdriver.
Secure the backplate to the anchors with the screws and
washers provided.
Repeat steps 5-7 for all six anchor holes.
Install the Canopy
Hook a safety cable through the safety brackets on each end
of the canopy and backplate.
SAFETY
BRACKETS
SAFETY
CABLE
1D
2A
5
2
6
2
5
2
8
2
7
2
1
6
7
8
8
7
1
1
1
Advertising
This manual is related to the following products: