LBL Lighting Fusion Jack Wood Canopy 11 Light Round LED - Manual (Page 3)

3
Connect the black fixture wire to the hot power line wire
with a wire nut.
Connect the white fixture wire to the neutral power line wire
with a wire nut.
Connect the green wire and bare copper wire to a suitable
ground according to local electrical codes.
Line up the canopy to the backplate and install all the button
head screws.
Install the Fixtures
Screw a Fusion Jack connector into each Fusion Jack port.
FUSION JACK
CONNECTOR
FUSION JACK PORT
2B 3A
2C
2 2
2
2 5
2 3
2 4
3
4
5
5
5
2 1
1