LBL Lighting Tube 1 P - Manual (Page 2)

2
Loosen the two M3 set screws on the (Do Not Remove)
sides of the Fusion Jack assembly rod with the provided
1.5 MM Allen wrench.
M3 SET SCREW
1.5 MM ALLEN
WRENCH
FUSION JACK
ASSEMBLY ROD
Insert the fixture rods into the Fusion Jack assembly rod, make
sure the fixture rods are aligned with the top of the Fusion
Jack assembly rod.Tighten the two M3 set screw with 1.5 MM
Allen wrench.
M3 SET SCREW
1.5 MM ALLEN
WRENCH
FIXTURE ROD
FUSION
JACK
ASSEMBLY
ROD
M3 SET
SCREW
FIXTURE ROD
Insert the two fixture rods completely into the socket
assembly rods and secure them place by tightening the M3 set
screws with the provided 1.5 MM Allen wrench.
1.5 MM ALLEN
WRENCH
SOCKET
ASSEMBLY
ROD
5
7
5 5
7
6
6
6
7
1A 1D
1A 1E
1A 1F