LBL Lighting Tube 1 P - Manual (Page 3)

Install the Lamp
Loosen the two M3 sets screw on the
(Do Not Remove)
socket with the 1.5 MM Allen wrench.
SOCKET
1.5 MM ALLEN
WRENCH
M3 SET
SCREW
1.5 MM ALLEN
WRENCH
M3 SET
SCREW
NOTE:
Use only your fingers and soft cloth to replace
the lamp.
Use Watt,Type Xelogen
MAX 35
(Xenon) Bi-Pin Lamp.
Push the lamp pins completely into the socket holes and
tighten the two M3 set screws with the 1.5 MM Allen wrench
to secure lamp in place.
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular
Halogen lamp.A regular Halogen lamp requires a protective
glass shield.
LAMP
3
NOTE:
To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
From between the fixture rods, carefully place the glass shade
onto the socket assembly.
GLASS SHADE SLOT
SOCKET ASSEMBLY
1
2
3
1A 2A
1A 2B
1A 2C
1
1
3
2
2
3