Wire the fixture, Incandescent and 24 compact gu fluorescent version, Four pin compact fluorescent version – LBL Lighting Clifton User Manual
Page 3: 1a 4a, 1a 4b
3
1A
4A
Connect the mounting plate ground wire and the fixture
ground wire to a suitable ground in accordance with
local electrical codes.
Connect the neutral power line to the insulated pendant
wire with the white tracer (white) using a wire nut.
Connect the hot power line to the other insulated
pendant wire (black) with a wire nut.
1
2
3
1
3
2
Wire the Fixture
Incandescent and
24 Compact
GU
Fluorescent Version
Caution: The wiring diagram will vary depending on
the type of lamp and wattage of the fixture. Choose
the correct wiring method accordingly and make
sure to only use the transformer provided with your
pendant.
1A
4B
Connect the yellow ballast wire to the insulated pendant
wire with the white tracer (white wire) using a wire nut.
For 13 or 18 Watt lamps: Connect one of the red
ballast wires to the other insulated pendant wire (black)
with a wire nut. Cap off the other red ballast wire with a
wire nut.
For 26 or 32 Watt lamps: Connect both of the red
ballast wires to the other insulated pendant wire (black)
with a wire nut.
Connect the fixture and the crossbar ground wire to a
suitable ground in accordance with local electrical
codes.
Connect the white ballast wire to the neutral power line
wire with a wire nut.
Connect the black ballast wire to the hot power line wire
with a wire nut.
1
2
3
4
Four Pin Compact Fluorescent
Version
BALLAST
4
13
5
13
6
2
1
2
5
6
BALLAST
3
1
5
6
26 OR 32
WATT
13 OR 18
WATT