LBL Lighting Onyx Teardrop - Manual (Page 2)

Place the fixture canopy onto the backplate. Level the fixture
vertically and tighten the two M3 set screws with the 1.5MM
Allen wrench to secure the fixture in place.
CANOPY
M3 SET SCREW
1.5MM ALLEN WRENCH
2
Line up two backplate holes with the electrical box holes.
Mount the backplate to the electrical box with the two #8-32
screws provided.
Connect the green wire to a suitable ground in accordance
with local electrical codes.
BACKPLATE
ELECTRICAL BOX HOLE
#8-32 SCREW
Connect the white fixture wire to the neutral power line wire
with a wire nut.
Connect the black fixture wire to the hot power line wire with
a wire nut.
Place all wires and wire nut connections inside the electrical
box.
1D
1C
6
7
8
7
5
5
6
6
9
10
8
1E
11
11
9