LBL Lighting Onyx Teardrop - Manual (Page 3)

LAMP
SOCKET
M3 SET
SCREW
1.5MM ALLEN
WRENCH
ONYX SHADE
Replace the onyx shade onto the socket housing and tighten
the M3 set screw on side of the onyx shade with the 1.5MM
Allen wrench.
NOTE: Use only your fingers and a soft cloth to install
the lamp.
Push the lamp pins completely into the socket holes.
Use 120 Volt, Watt Type T4, MAX 60
G9 Base, Bi-Pin Halogen Lamp.
3
Install the Lamp & Shade
2B 2A
1
2
2
1