LBL Lighting Icicle - Manual (Page 2)

2
1D 1C
In accordance with local electrical codes, make sure that the
backplate is grounded.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
Place all wires and wire nut connections properly inside the
electrical box.
Place the fixture canopy onto the backplate. Level the fixture
vertically and tighten the two M3 set screws with the 1.5MM
Allen wrench to secure the fixture in place.
1
M3 SET SCREW
1.5MM ALLEN WRENCH
CANOPY
1
5
6
8
9
7
9
5
7
6