LBL Lighting Icicle - Manual (Page 3)

3
1
Install the Lamp & Shade
SOCKET
LAMP
Remove the three thumb screws.
Place the glass shade onto the socket and align the glass shade
holes with the posts.
GLASS SHADE
1
2
THUMB SCREW
POST
1
Replace and tighten the three thumb screws to secure the
glass shade in place.
Push the lamp pins completely into the socket holes.
NOTE: Use only your fingers and a soft cloth to install
the lamp.
Use 120 Volt, Watt Type T4, MAX 60
G9 Base, Bi-Pin Halogen Lamp.
1
2A
2
2B
3 3
1
3
2C
4
2 2
4 4