LBL Lighting Hollywood Beach User Manual
Hollywood beach ceiling, Install the fixture, Installation instructions for
1
Installation Instructions for
Hollywood Beach Ceiling
1.0
980HWBEACHC
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Ceiling
Install the Fixture
JC651_2D
GENERAL PRODUCT INFORMATION:
This product can mount to either a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1B
2
Unscrew and remove the three thumb screws and gently
remove the diffuser.
2
DIFUSER
THUMB
SCREWS
Mount the crossbar to the electrical box with the two
#8-32 screws.
CROSSBAR
ELECTRICAL
BOX
#8-32 SCREW
#8-32 SCREW
1A
1
1
1
3
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
1C
3
4
5
4
5