LBL Lighting Hollywood Beach - Manual (Page 2)

2
1D
Place all wires and wire nut connections inside the
electrical box.
Mount the fixture to the ceiling by installing it onto
the crossbar and securing it tightly with the knurled
nuts.
6
KNURLED NUT KNURLED NUT
7
2A
Screw the lamps into the sockets.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Use
Type A19 Medium Base Lamp. 120 volt MAX 75 Watt
1
Install the Lamp and Diffuser
2B
2 Install the diffuser and align the holes to the pegs on
the shade.
Secure the diffuse by reinstalling and tightening the
three thumb screws.
2
3
NOTE: To re-lamp, reverse the section 2 instructions
to remove the diffuser and gain access to the lamps
and sockets.
PEGS
DIFFUSER
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2012 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!
LAMP SOCKET