LBL Lighting Clipper/G - Manual (Page 2)

2
Feed the power line wires through the base center hole,
washer and inside nut.
Tighten the inside nut completely to secure the base against
the wall.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire
with a wire nut.
WASHER
NIPPLE INSIDE NUT
Remove all four cap screws with the 5/32 Allen wrench
provided.
5/32 ALLEN
WRENCH
CAP SCREW
Carefully remove the front cover and the glass shade from the
base.
FRONT COVER GLASS SHADE BASE
7
1C
7
1D
5
6
8
9
1E
10
6
5 5
5 5
8 9
10