LBL Lighting Clipper/G - Manual (Page 3)

3
Use Volt, Watt Type A19 MAX 75 120
Medium Base Lamp.
Screw the lamp completely into the socket.
Position the wires and wire nut connections behind the socket
away from the lamp.
SOCKET
FRONT COVER GLASS SHADE BASE
Replace the glass shade and the front cover onto the base.
Align the front cover holes with the base holes.
While supporting the glass shade and front cover in place,
replace and tighten the four cap screws with the 5/32 Allen
wrench provided.
C AUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE:To replace the lamp, follow steps 5 & 6 on page 2,
remove the old lamp, and then follow steps 11 though 14.
LAMP
5/32 ALLEN
WRENCH
CAP SCREW
1H 1F
11
12
14
11
14 14
14 14
13
13
1G