LBL Lighting Clipper/G CF - Manual (Page 2)

2
Carefully remove the front cover and the glass shade from the
base.
FRONT COVER GLASS SHADE BASE
NIPPLE
INSIDE
NUT
WASHER
Feed the power line wires through the base center hole,
washer and inside nut.
Slide the base onto the mounting plate nipple and tighten the
inside nut completely to secure the base against the wall.
Connect the fixture white ballast wire to the neutral power
line wire with a wire nut.
Connect the fixture black ballast wire to the hot power line
wire with a wire nut.
Remove all four cap screws with the 5/32 Allen wrench
provided.
5/32 ALLEN
WRENCH
CAP SCREW
7
1C
7
1D
5
6 8
9
1E
10
6
5 5
5 5
9
10
1F
8
7