LBL Lighting Clipper/G CF - Manual (Page 3)

3
FRONT COVER GLASS SHADE BASE
Replace the glass shade and the front cover onto the base.
Align the front cover holes with the base holes.
C AUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE:To replace the lamp, follow steps 5 & 6 on page 2,
remove the old lamp, and then follow steps 11 though 14.
SOCKET
LAMP
REFLECTOR
Use Watt GX23-2 Base MAX 13
Quad Tube Compact Fluorescent Lamp
With The 6953NM and 6953MCNM Models.
Position the wires and wire nut connections behind the
reflector away form the lamp.
Push the lamp pins completely into the socket holes.
Use Watt G24Q-3 Base Triple MAX 26
Tube Compact Fluorescent Lamp With The
6956HE and 6956MCHE Models.
Use Watt GX24Q-1 Base Triple MAX 13
Tube Compact Fluorescent Lamp With The
6953HE and 6953MCHE Models.
While supporting the glass shade and front cover in place,
replace and tighten the four cap screws with the 5/32 Allen
wrench provided.
5/32 ALLEN
WRENCH
CAP SCREW
1I
1G
11
12
14
14 14
14 14
13
1H