Save these instructions, 1a 3a 1a 3b, 1a 2c 1a 2d – LBL Lighting LED Illum MO Surf Mag Xfmr 150w 120v/12v User Manual
Page 4
4
SAFETY WIRE
CROSSBAR
BRACKET
Hook the LED transformer safety wire onto the crossbar
bracket.
Connect the crossbar green wire to the ground in accordance
with local electrical codes.
Connect the LED transformer white wire to the neutral
power line wire with a wire nut.
Connect the LED transformer black wire to the hot power
Slide the LED transformer onto the crossbar.
Align the LED transformer holes with the crossbar holes;
replace and tighten the two #8-32 flat head screws.
#8-32
SCREW
Connect the LED-Illuminated Monorail
to the Transformer
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
A Generation Brands Company
Connect the Monorail to the standoffs so that the Monorail is
secured in place. Refer to the instruction provided with the
standoff.
Make sure that the transformer power is off.
Place the power feed housing onto the Monorail.
Completely back out the screw on the power feed cap.
Screw the power feed cap completely to the power feed
housing. Make sure that the power feed cap is not cross
threaded.
Tighten the screw on the power feed cap for proper power
connection.
LED-ILLUMINATED
MONORAIL
POWER FEED
HOUSING
POWER
FEED CAP
SCREW
1A
3A
1A
3B
3
4
5
6
1
2
3
4
5
6
1A
2C
1A
2D
3
4
5
6
7
8
8
8
3
5
6
4