Install the transformer – LBL Lighting MO Surf Elec Xfmr 60w 277v/12v LED User Manual
Page 3
Connecting the Center Power Feed
Connector to the MonoRail
4A
4
5
1
2
3
Install the Transformer
CEILING
ELECTRICAL
BOX
3A
7
8
7
5
3B
SCREW
Properly place the transformer, wires, and wire nut
connections inside the transformer housing.
Line up the transformer housing with the backplate and
reinstall all of the screws.
6
10
6
11
11
11
8
5
9
Connect the Monorail to the standoffs so that the Monorail is
secured in place. Refer to the instruction provided with the
standoff.
Make sure that the transformer power is off.
Place the power feed housing onto the Monorail.
Completely back out the screw on the power feed cap.
Screw the power feed cap completely to the power feed
housing. Make sure that the power feed cap is not cross
threaded.
Tighten the screw on the power feed cap for proper power
connection.
MONORAIL
POWER FEED
HOUSING
POWER
FEED CAP
SCREW
4B
6
3
5
4
6
Connect the crossbar green wire to the ground in accordance
with local electrical codes.
Connect the white transformer wire to the neutral power line
with a wire nut.
Connect the black transformer wire to the hot power line
wire with a wire nut.
8
8
9
3