1a 1g, 1a 1h 1a 1i – LBL Lighting Standoff Ball Joint Assembly User Manual
Page 2
2
BALL JOINT POST
Loosen
the M4 set screw on the ball joint
(Do Not Remove)
post with the 2 MM Allen wrench provided and remove the
support post.
2 MM ALLEN
WRENCH
M4 SET
SCREW
Screw the ball joint post completely to the threaded nipple.
BALL JOINT POST
THREADED NIPPLE
BALL JOINT POST
BALL JOINT ROD
2 MM ALLEN
WRENCH
M4 SET SCREW
Push the ball joint rod completely into the ball joint post and
tighten the M4 set screw with the 2 MM Allen wrench.
Repeat steps 8 through 10 for the remaining ball joint
connectors.
Loosen
the M4 set screw on the support
(Do Not Remove)
post with the 2 MM Allen wrench provided and remove the
support post.
STANDOFF ROD
Screw the support post completely onto the threaded post.
SUPPORT POST
THREADED POST
2 MM ALLEN
WRENCH
M4 SET SCREW
Push the standoff rod completely into the support post and
tighten the M4 set screw with the 2 MM Allen wrench.
Repeat steps 12 through 14 for the remaining standoffs.
SUPPORT POST
2 MM ALLEN WRENCH
M4 SET SCREW
SUPPORT POST
1A
8
9
10
11
1D
1A
1E
1A
1F
13
1A
1G
14
15
12
1A
1H
1A
1I
8
9
13
14
10
12