Chatsworth Products Hot Aisle Containment - Manual

HOT AISLE CONTAINMENT
IIS-BTS_HAC_KIT, 12/01/13, Rev. 1, CPI/dknapp
800-834-4969 (USA & Canada) • www.chatsworth.com • [email protected]
For international phone numbers, see our website or contact CPI Tech Support.
This drawing contains proprietary and confidential information and is protected by U.S. and international law.
Unauthorized reproduction, disclosure or use of the drawing or the information therein is expressly forbidden
except as agreed to in writing by Chatsworth Products, Inc.
Page 1 of 2
Installation Instructions
Safety Information
WARNING: Improper use of this product may lead to serious injury
or death. Read and understand all instructions for proper
installation and use of this product
Installation of aisle Containment products may require the use of
ladder, Scaffolds, and other climbing tools. Follow all climbing
device procedures and observe all safety and warning precautions.
The Aisle containment door components are heavy and large. This
requires that at least two personnel be used for assembly and
installation. Obtain adequate assistance or hire professional
equipment riggers.
Intended Use
Install this rack only in a restricted service environment, such as a data center.
Use indoors only, in environmentally controlled areas; do not use outdoors, in
harsh environments or in air-handling spaces. Use this rack for computer
equipment, including servers and peripherals. Allow only qualified service
personnel to use this rack.
Tools Required
Utility knife
#2 Phillips Screw Driver
10mm Socket Wrench.
Included Hardware
3/8” -16 UNC 3/8” -16 UNC M6 X 16mm
Screw
Nut Bolt, RHSN
8 each. 8 each
M6
Hex Nut
8 each
Utility Knife