Chatsworth Products Additional Power Distribution Units User Manual
Page 28

CPI PDU User Manual Rev. 10.0.
June 28, 2010
26
Step 4: The Main Menu – Navigating The Web Access Program
Once logged in, you will see four buttons: [Status], [Configure], [Users] and [Logout].
• Click the [Status] button to view current, temperature and humidity measurements
and to control receptacles on Controlled PDUs. See page 31 for details.
• Click the [Configuration] button to change IP settings, set current, temperature and
alarm limits and setup alarms (SNMP traps). See pages 28 through 30 for details.
• Click the [Users] button to assign or change user accounts: names and passwords.
See page 27 for details.
• Click the [Logout] button to disconnect from the PDU.
For initial setup, click the [Users] button (see page 27) and assign a new user login and
password. Then, click the [Configure] button (see page 28 through 30) and re-configure
the PDU to match your network requirements.