Campbell Scientific AM16/32B Relay Multiplexer - Manual (Page 48)

AM16/32B Relay Analog Multiplexer
38
The AM
FIGURE
8.1 Mounting Tabs
16/32B has mounting tabs allowing attachment by four screws. See
8-1 dimensions.
9.4 in
23.9 cm
1 in
2.54 cm
3 in
7.62 cm
AM16/32
8-1. Moun
AM16/32B
9 in
22.9 cm
3 in 1 in
2.54 cm 7.62 cm
FIGURE ting tab hole pattern
U-bolts a
pipe. An
8.2 Controlling Humidity
The mul
Desiccan
inside th
Air movement should not be restricted through an
re provided with enclosure to attach to a 1.25 inch (32 mm) diameter
enclosure may also be lag-bolted to a wall or other flat surface.
tiplexer is susceptible to corrosion in high relative humidity.
t packs are available from Campbell Scientific and should be used
e enclosure to remove water vapor.
enclosu
or noxio re containing batteries that may produce explosive
us gases (for example, lead-acid batteries).
CAUTION