Campbell Scientific CM106BK Tripod Kit - Manual (Page 19)

CM106BK Tripod Kit
Strip 1/2 in. (12.7 mm) of insulation from the ends of a 12 AWG wire. Attach
one end of the wire to the tripod ground lug, and the other end to the enclosure
ground lug as shown in FIGURE 2-6.
Mount the lightning rod and clamp to the tripod mast with pointed tip up, and
notch at bottom, as shown in FIGURE 2-7.
FIGURE 2-7. Lightning rod and tripod grounding lug
11