Campbell Scientific CM106BK Tripod Kit - Manual (Page 9)

CM106BK Tripod Kit
1. Cautionary Statements
• READ AND UNDERSTAND the Precautions section at the front of this
manual.
• WARNING — Ensure structural integrity during setup and weather
extremes to minimize the chance of damaging the tripod or instruments.
Read all instructions carefully. Once the tripod is in full vertical position,
securely fasten it to the ground using ground spikes.
• WARNING — For installations where soil structure is questionable or the
tripod may experience high wind loads, concrete footings for the tripod
feet and guy anchors should be considered.
2. Tripod Installation
2.1 Tripod Base Assembly
2.1.1 Parts List
Part # Description Qty
29762 Tripod Foot 3
29763 Leg Clamp Base 3
29764 Tripod Body 3
19308 Spacer 6
5449 Ground Lug 2
23 Nut 6
19102 5/16-18 x .75 Screw 3
30253 5/16-18 x 1.00 Screw 3
4365 5/16 Flat Washer 3
29844 Leg Clamp 3
29845 Leg Clamp with Weld Nut 3
850 Lightning Rod 1
17589 Lightning Rod Clamp Assembly 1
19175 5/16-18 x 2.25 Screw
6
18126 5/16-18 Nut 6
4366 5/16 Lock Washer 6
19102 5/16-18 x .750 Screw 3
27002 5/16-18 x 2.00 Screw 12
4904 5/16-18 Lock Nut 12
1