Tripod components, Mounting brackets, 1 cm210 crossarm mounting kit – Campbell Scientific CM106K Tripod User Manual

Page 25

Advertising
background image

CM106K Tripod

6. Tripod Components

The tripod body is packaged with the lightning rod. The optional guy kit is
packaged separately.

7. Mounting Brackets

Mounting brackets covered in this section have U-bolts that attach to vertical
and/or horizontal pipes with the following ranges of outside diameters:

inches

mm

Nominal Pipe Size (inches)

1.5” U-bolt

1.0 – 1.5 25.4 – 38.1 ¾ – 1

2” U-bolt

1.3 – 2.1 33.0 – 53.3 1 – 1 ½

2” U-bolt
with plastic V-block

1.0 – 2.1 25.4 – 53.3 ¾ – 1 ½


Some of the brackets (e.g. the CM210) include 1.5” and 2” U-bolts to extend
the range of pipe diameters that the bracket can accommodate. Brackets with
holes for a 1.5” U-bolt will accept a user-supplied 1.75” U-bolt.

7.1 CM210 Crossarm Mounting Kit

CM200 series crossarms include a CM210 bracket as shown in Figure 7-1.
The CM210 can be ordered separately to attach a user-supplied pipe (1.0 –
1.5” OD) to a mast or tower leg (1.0 – 2.1” OD), or to attach a crossarm to two
tower legs.

CM210

FIGURE 7-1. CM210 Crossarm Mounting Kit (shown with user-supplied

pipe)

19

Advertising