Campbell Scientific CM106K Tripod - Manual (Page 7)

CM106K Tripod
1. Cautionary Statements
1.1 Site Selection
• Select a safe site to install the tripod.
• The distance between any power lines and the installation site should be at
least one and one-half times the height of the tripod. Make the distance
even greater, if at all possible. Since all overhead power lines look
somewhat alike, consider them all dangerous and stay well away from
them.
• If you have power lines or buried utilities in the area, call your local utility
providers for assistance.
1.2 Tripod Mounting
• NEVER work alone; always have someone near who can summon help.
• Certain clothing may provide a degree of safety, but don't depend on it for
your life (rubber boots or shoes, industrial rubber gloves and a long sleeve
shirt or jacket).
• Check weather conditions. Be sure that it hasn't rained recently and that
the ground is not wet or muddy. Make sure that rain or thunderstorms are
not predicted for the day you decide to install the tripod.
• The wind can blow the tripod into a nearby power line. Don't install or
remove tripods in moderate or heavy winds.
• If you need to use a ladder, make sure it is made of non-conductive (non-
metallic) material. (This is a safety rule that you should follow whenever
you're working with electrical equipment.)
• If possible, have someone present who has been trained in electric shock
first aid.
1.3 Tripod Installation
• Properly assemble the tripod according to instructions (do this where the
tripod is to be put up).
• Once the tripod is up in full vertical position, securely fasten it to the
ground using ground spikes. For situations where soil structure is
questionable or the tripod may experience high wind loads, concrete
footings for the tripod feet and guy anchors should be considered.
• Ground the tripod according to the National Electrical Code.
1