Campbell Scientific CS215 Temperature and Relative Humidity Probe - Manual (Page 13)

CS215 Temperature and Relative Humidity Probe
5. Under the Available Sensors and Devices list, select the Sensors |
Meteorological | Relative Humidity & Temperature folder. Select
CS215 Temperature & Relative Humidity Sensor. Click
to move
the selection to the Selected device window. Data defaults to degree
Celsius. This can be changed by clicking the Deg C box and selecting
Deg F, for degrees Fahrenheit, or K for Kelvin.
6. After selecting the sensor, click at the left of the screen on Wiring
Diagram to see how the sensor is to be wired to the datalogger. The
wiring diagram can be printed out now or after more sensors are added.
7. Select any other sensors you have, then finish the remaining Short Cut
steps to complete the program. The remaining steps are outlined in Short
Cut Help, which is accessed by clicking on Help | Contents |
Programming Steps.
3