Campbell Scientific CS215 Temperature and Relative Humidity Probe - Manual (Page 19)

CS215 Temperature and Relative Humidity Probe
4. Tighten the collar until it securely grips the probe.
5. Attach the radiation shield to the tripod mast, crossarm, or tower leg using
the supplied U-bolt. See FIGURE 7-1 and FIGURE 7-2 for examples of
shield mounting.
6. Route the cable to the datalogger, and secure the cable to the mounting
structure using cable ties.
FIGURE 7-1. CS215 and 41303-5A Radiation Shield on a tripod mast
FIGURE 7-2. CS215 and 41303-5A Radiation Shield on a
CM200 Series Crossarm
41303-5A
CS215
Tripod or Tower Mast
41303-5A
CS215
Tripod or Tower Mast
CM200 Series Crossarm
9