Campbell Scientific OBS-Mobile Software for Archer-OBS - Manual (Page 10)

Section 1. Operations
1.3 Pop-Up Menus
OBS-Mobile has Pop-up menus for Files, and OBS-3A (see FIGURE 1-5).
FIGURE 1-5. OBS Mobile Pop-Up Menus
The OBS-3A menu allows you to set Serial Port Settings, Retrieve and
Restore Coefficients, Erase Flash Memory, and put the instrument into a low
power Sleep.
1.4 Communication Settings
The Serial Port Settings is used to configure the Archer communication
settings. The default communication settings are: 115 kbs, 8 data bits, no
parity, no flow control. These settings will work for most applications. In
order to pick a slower baud rate, select the desired rate from the dialog box and
click Apply (see FIGURE 1-6). The rate adjustment takes two seconds. If your
Archer is set to the wrong rate for some reason, use the check box to select
ONLY change handheld. Then click Apply and the button.
If you get the OBS-3A information box, the baud rate of the unit is
synchronized with your Archer. If you don’t get an information box, repeat the
above procedure using a different baud rate.
1-4