Campbell Scientific OBS-Mobile Software for Archer-OBS - Manual (Page 18)

Section 1. Operations
1.13 Data Retrieval
1. Remove dummy plug and connect OBS-3A to PC with test cable.
2. Run the OBS-Mobile (see Section 1.2).
3. Check the Data Window to verify the instrument is transmitting data.
4. Click to end data collection and use Get File to save data in a
file.
5. Highlight the data with the start and end times you want.
6. Click Browse, select a destination and file name. Then click Retrieve to
download the data.
7. Wait for the progress bar to disappear and examine data as a plot or test
file (Section 1.16—Graphing).
1.14 Shutdown
From the OBS menu (see Section 1.3—Pop-Up Menus), select Sleep. See
menus shown in the following section.
1-12